3D Platform

Cleaning Instructions (Volcano)


    • Related Articles

    • Replacing the Hotend (Volcano)

      These instructions are for removing and replacing a hotend on a Gen 2 Bulldog extruder. You may want to replace the hotend to upgrade your extrude, or to replace a damaged or worn out component. Tools needed: • 2mm hex wrench • 2.5mm hex wrench • 3mm ...
    • Cleaning Instructions (HFA)

    • Cleaning Instructions (HFE 300)

    • Replacing the Volcano Hotend (Classic WorkBench)

      These instructions are for removing and replacing a hotend on a Gen 2 Bulldog extruder.  You may want to replace the hotend to upgrade your extrude, or to replace a damaged or worn out component. Tools needed: • 2mm hex wrench • 2.5mm hex wrench • ...
    • Replacing the Volcano Hotend (WorkSeries 100)

      These instructions are for removing and replacing a hotend on a Gen 2 Bulldog extruder.  You may want to replace the hotend to upgrade your extrude, or to replace a damaged or worn out component. Tools needed: • 2mm hex wrench • 2.5mm hex wrench • ...