Simplify 3D Machine Profiles (DT LITE)

Simplify 3D Machine Profiles (DT LITE)

Please see list of available profiles in the attachments section below.

To import the profile:
  1. Save the file to your PC
  2. Launch Simplify 3D
  3. Navigate to the File menu
  4. Select "Import FFF Profile" from the list
  5. Navigate to location where the file was saved and select the .FFF file
The profile will then be available from the drop-down menu in the "Edit Process Settings" window.

    • Related Articles

    • Simplify 3D Machine Profiles (DT60)

      Please see list of available profiles in the attachments section below. To import the profile: Save the file to your PC Launch Simplify 3D Navigate to the File menu Select "Import FFF Profile" from the list Navigate to location where the file was ...

    • Simplify 3d Machine Profiles (HT45)

      Please see list of available profiles in the attachments section below. To import the profile: Save the file to your PC Launch Simplify 3D Navigate to the File menu Select "Import FFF Profile" from the list Navigate to location where the file was ...

    • Maintenance Manual (DT LITE)

    • Design Tips and Tricks (DT LITE)

    • Machine Firmware update - September 2020 (WorkSeries 400)

      Check Current Firmware Version This update is for Duet Firmware version 3.1.1. Please only upgrade if your current version is less than 3.1.1. To check the current version of firmware on your machine follow the applicable instructions below: Via ...