How to Calibrate your Classic WorkBench

How to Calibrate your Machine (Classic WorkBench)


    • Related Articles

    • WorkBench Electrical Schematic (Classic WorkBench)

    • Firmware Update Process - October 2017 (Classic WorkBench)

      Index Supplies Arduino software installation and setup Driver installation Firmware selection COM port identification Final preparation and flashing firmware Troubleshooting and common errors Downloads and attachments 1. Supplies needed Computer with ...

    • G-code Reference Sheet (Classic WorkBench)

      G-Code is the basic language of 3D printing.  A G-Code file provides a complete set of machine instructions which the printer needs to complete a part.  These files are generated by processing a 3D model using a slicing program such as Simplify3D, ...

    • Replacing the Volcano Hotend (Classic WorkBench)

      These instructions are for removing and replacing a hotend on a Gen 2 Bulldog extruder.  You may want to replace the hotend to upgrade your extrude, or to replace a damaged or worn out component. Tools needed: • 2mm hex wrench • 2.5mm hex wrench • ...

    • Print Speed Calculator (Classic WorkBench)

      Print speed can be a difficult setting to determine for your prints. It is based on layer height and nozzle, therefore it can change somewhat frequently. To assist with this, we have developed a print speed calculator to assist in determining what ...