3D Platform

Simplify 3d Machine Profiles (HT45)

Please see list of available profiles in the attachments section below.

To import the profile:
  1. Save the file to your PC
  2. Launch Simplify 3D
  3. Navigate to the File menu
  4. Select "Import FFF Profile" from the list
  5. Navigate to location where the file was saved and select the .FFF file
The profile will then be available from the drop-down menu in the "Edit Process Settings" window.
    • Related Articles

    • Simplify 3D Machine Profiles (DT60)

      Please see list of available profiles in the attachments section below. To import the profile: Save the file to your PC Launch Simplify 3D Navigate to the File menu Select "Import FFF Profile" from the list Navigate to location where the file was ...
    • Simplify 3D Machine Profiles (DT LITE)

      Please see list of available profiles in the attachments section below. To import the profile: Save the file to your PC Launch Simplify 3D Navigate to the File menu Select "Import FFF Profile" from the list Navigate to location where the file was ...
    • Machine Firmware update - September 2020 (WorkSeries 400)

      Check Current Firmware Version This update is for Duet Firmware version 3.1.1. Please only upgrade if your current version is less than 3.1.1. To check the current version of firmware on your machine follow the applicable instructions below: Via ...
    • Machine Firmware update - September 2020 (WorkSeries 200 & 300)

      Check Current Firmware Version This update is for Duet Firmware version 3.1.1. Please only upgrade if your current version is less than 3.1.1. To check the current version of firmware on your machine follow the applicable instructions below: Via ...
    • Firmware Update Process - October 2017 (Classic WorkBench)

      Index Supplies Arduino software installation and setup Driver installation Firmware selection COM port identification Final preparation and flashing firmware Troubleshooting and common errors Downloads and attachments 1. Supplies needed Computer with ...