Index Supplies Arduino software installation and setup Driver installation Firmware selection COM port identification Final preparation and flashing firmware Troubleshooting and common errors Downloads and attachments 1. Supplies needed Computer with ...
These instructions are for removing and replacing a hotend on a Gen 2 Bulldog extruder. You may want to replace the hotend to upgrade your extrude, or to replace a damaged or worn out component. Tools needed: • 2mm hex wrench • 2.5mm hex wrench • ...
G-Code is the basic language of 3D printing. A G-Code file provides a complete set of machine instructions which the printer needs to complete a part. These files are generated by processing a 3D model using a slicing program such as Simplify3D, ...