Molex crimp part numbers for 3DP1000, WorkBench, and WorkSeries

Molex Microfit 3.0 series.

Crimp pins:

Female pin: 43030-0001

Male pin: 43031-0001

Connector housings:

2-pin receptacle: 43645-0200

2-pin plug: 43640-0201

4-pin receptacle: 43645-0400

4-pin plug: 43640-0401

Crimping tool:

63819-0000

Related Articles
WorkBench User Manual
WorkBench Electrical Schematic (Classic WorkBench)
Machine Firmware update - September 2020 (WorkSeries 400)
Check Current Firmware Version This update is for Duet Firmware version 3.1.1. Please only upgrade if your current version is less than 3.1.1. To check the current version of firmware on your machine follow the applicable instructions below: Via ...
Machine Firmware update - September 2020 (WorkSeries 200 & 300)
Check Current Firmware Version This update is for Duet Firmware version 3.1.1. Please only upgrade if your current version is less than 3.1.1. To check the current version of firmware on your machine follow the applicable instructions below: Via ...
Touchscreen Firmware Update - September 2020 (WorkSeries 400)
Check Current Firmware Version This update is for touchscreen firmware Version 1.23.2+3. Please only upgrade if your current version is less than this version. To check the current version of firmware on your touchscreen follow the instructions ...

Related Articles