HFA Verification Prints

HFA Verification Prints

The 3DP Validation Prints are standard print files that are provided on the internal SD card for each WorkSeries machine. The g-codes have been verified in our factory and each of these is printed on, and ships with, your new WorkSeries 200, 300 or 400 machine so that you can compare your print to the factory provided print. We recommend using these prints as a baseline for validating and troubleshooting machine operation.


Downloads

Work Series 200 HFA extruder Validation Prints: https://drive.google.com/open?id=1BxRktCPLKb-LyCluZowGwTyTfFQSb2NR

Work Series 300 HFA extruder Validation Prints: https://drive.google.com/open?id=1ttIP3QB1wrIp3IbuNPM7pksVL2SS6h0K

Work Series 400 HFA extruder Validation Prints: https://drive.google.com/open?id=1O9SL7xqulufC4maq1ic4Hrwdzs9uE3eC

    • Related Articles

    • Volcano Extruder Validation Prints

      The 3DP Validation Prints are standard print files that are provided on the internal SD card for each WorkSeries machine. The g-codes have been verified in our factory and each of these is printed on, and ships with, your new WorkSeries 200, 300 or ...

    • Assembly Torque Specs (HFA)

      Ensure the following torque specs are used to re-tighten the following components anytime the HFA extruder is disassembled for nozzle changes and or heat-break replacement. The easiest way to measure the torque spec for both of these components is by ...

    • HFE 300 Extruder Validation Prints

      The 3DP Validation Prints are standard print files that are provided on the internal SD card for each WorkSeries machine. The g-codes have been verified in our factory and each of these is printed on, and ships with, your new WorkSeries 200, 300 or ...

    • HFA Upgrade Kit Installation Instructions (HFA)

    • Cleaning Instructions (HFA)